- Additional information
Angled Leg Fixing Plate
Angled Leg Fixing Platefor securely mounting wooden legs onto your sofas, chairs and other furniture
Sold individually or in sets of 2 and 4
To be used with a standard 8mm dowel screw
These quality engineered plates allow a 12.5 degree angle to turn a straight tapered leg into an angled accent leg.
Suitable for the vast majority of frames. Simply check the underside of the frame where you will be fitting the leg to ensure the plate can be screwed directly into the wood, check the width and depth of the frame.
The plate is 60mm on each side.
A nut is welded to the top side of each plate to provide added strength when the leg is screwed to the plate.A recess hole is required for the plate to fit flush
Once the plate is fitted, then simply screw Furniture legs from our shop, with 8mm dowel screw, directly through the hole in the center of the plate by hand. The easy way to securely fit an angled leg to furniture.
IMPORTANT NOTE TO BUYER
We do Pre-Drilled, Threaded, M6(6mm), M8(8mm) and M10(10mm) fittings on most of the furniture feet. Please ensure you order the correct fitting. If you’re unsure you can check by getting a 6mm, 8mm or 10mm nut and try to fit to existing leg. If you do not have legs currently on your furniture then you can use a long 6mm, 8mm or 10mm bolt and try to screw in to the bottom of your furniture.We also do feet with Pre-Drilled holes so you can just attach with screws, and feet with a Threaded D-nut so you can bolt the feet to your furniture. If you’re unsure or have a question please feel free to email or call 07462 529 108
PLEASE NOTE YOU CANNOT MEASURE THE BOLT SIZE WITH A TAPE MEASURE. As you can not measure the thread accurately